5 Stage Reverse Osmosis Filter System 50 GPD

Five Stage Residential Reverse Osmosis System 50 GPD

Regular price: $249.00
Sale price: $249.00
Regular price
Unit price: per

TDS Meter

Replacement Set

Quantity must be 1 or more

Crystal Clear 5 Stage Residential Reverse Osmosis System 50 GPD features double o-ring housings and a clear pre-filter housing for quick inspection of the sediment filter, system utilizes 3/8" compression fittings, includes membrane separation, activated carbon absorption and conventional filtration to reduce the entire spectrum of contaminants that can be found in water.

RO systems substantially remove heavy metals, such as barium, cadmium, chromium, lead and mercury; radium 226/228 selenium, cysts, chlorine, salts, turbidity and more!

Reduce a broad spectrum of contaminants using 5 stages of treatment, 50 GPD Thin Film Composite Membrane.

STAGE 1 - 5 micron sediment prefiltration for mechanical reduction of rust and particulate, and provides membrane protection

STAGE 2 - Granular activated carbon pre-treatment filter

STAGE 3 - Activated carbon block for reduction of tastes, odors, chlorine, & organic impurities

STAGE 4 - Thin Film Composite reverse osmosis membrane for reduction of dissolved solids, including the range of toxic heavy metals, plus Giardia & Cryptosporidium Cysts

STAGE 5 - Activated in line carbon post filtration for final polishing of off-tastes & odors

Thin Film Composite membrane 50 gpd.
NSF listed (3.2 gals) metal storage tank, rated for pressures to 100 psi; non-corrosive construction.
High quality filters for superior performance. (5 micron spun, solid block carbon & carbon post filter).
Chrome, long-reach, lead-free faucet. (Meets CA req.).
Wrench for convenient filter housing removal.

Maintenance & Warranty:

Pre and post filters recommended change every six months for regular usage, or once a year in light usage.

RO membrane:

Change recommended based on periodic TDS rejection tests. Typical is every two years.

Warranty:

Components are warranted for one year from date of purchase, excluding membrane, pre & post filters.

System comes with complete installation instructions and installation diagram.

Optional: Replacement filter set (change every 6 months) includes: sediment filter, carbon prefilter, carbon block cartridge, carbon post filter, Only $46.95 Select on top.

Optional: Monitor membrane performance with a hand held TDS meter Save $3.00 when purchased with system Reg. $37.95 Now Only $34.95, Select meter on top.

Replacement Membrane 50 GPD (every 2 years) $61.19

System dimensions: Main unit 18"H X 16"W X 6"D, Storage tank 11" dia. X 15" tall

TDS rejection: 94%+

Operating pressure range: 40-100 psi

Operating temperature range: 40° - 100° F

Water conditions: 2000 ppm TDS max. 400 ppm hardness max. ph 4 to 11. (known foulants such as manganese, iron, or hydrogen sulfide should be removed by pre treatment prior to the RO system).

Note: Reverse Osmosis Systems typically wastes 4 to 5 gallons of water for every gallon it produces.

Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.

Provides superior quality water for less cost than bottled water.

Automatic shut-off valve conserves water.

Thin-film membrane provides maximum production and rejection of dissolved salts, metals, & minerals.

All components and accessories are included for quick and easy installation.